• Specifcally formulated mold mender for repairing plaster ceramic molds. 
• A one-part ready-to-use adhesive that works equally well on wet or damp plaster molds. 
• Just apply Mend-a-Mold on the broken pieces and press together.
• Apply pressure while adhesive sets(a rubber band or banding strap may be used).  Be sure to remove excess adhesive from inside of mold with a wet sponge. 
• After 2 – 3 hours, your mold is ready to use. 

NOTE: If a mold is deteriorated to the point of crumbling, no product can achieve 100% restoration.

MSDS Mend-a-Mold

6/22