The Vacuum Power Wedger combines the capability of batch mixing with the convenience of pugmill output and the ease of vacuum deairing.

All your scrap goes right back into the hopper and is recycled, vacuum deaired and pugged.

• Stainless Steel: Shaft, augers and paddles of stainless steel, along with aluminum mixing and pugging chambers, make for rust-free clay processing.
• Removable Blades: The mixing blade/auger assembly is removable for ease of cleaning.
• Large Hopper: The 8" x 8" hopper door allows for easy loading of up to 85 Ibs. of clay per batch.
• Batch Mixing Capability: Full batch mixing and blending capability allows for moisture adjustment before pugging.
• Pugmill Output: Switch to PUG after a batch is completely mixed, and the Power Wedger unloads itself in the form of 3" diameter deaired logs.
• Vacuum Deaired: Each batch can be deaired by starting the vacuum pump when the load is mixed. Air is removed during the last stage of mixing, leaving an air-free product when pugged out.
• Sealed Chamber: Leaving moist clay in the Power Wedger is not a problem. All the openings are sealed so clay will stay moist indefinitely.

Maximum Batch Capacity: 85 pounds

Pugging Rate*: 800 lbs. per hour

Mixing Rate*: 240 lbs. per hour

Dimensions: 46"L x 20"W x 33"H

Crated Weight: 410 lbs.

Hopper Door Size: 8" x 8"

Pug size: 3" round

Motor: 1.5 HP 1-phase, 16 amps at 120 volts or 8 amps at 240 volts

Optional Equipment: Variable Speed

Vacuum pump: 1/3 HP, 4 amps at 120 volts

*Capacities vary depending on clay conditions, type, moisture, etc.
**3-phase, 50Hz and other motors are available on special orders.

FOB Ukiah, CA 95482. Freight charges will be confirmed before shipment.