Brushable

• Unique 2-part liquid rubber molding compound which can be brushed or troweled on prototypes or one-of-a-kind originals without causing damage or loss.
• A mold can be built up in two or three coats applied about an hour apart.
• The finished mold can then be used for casting after 48 hours curing time.
• Resulting mold is flexible enough to turn inside out and is ideal for casting plaster, cement or wax without damaging undercuts.
• Porous models such as plaster or wood must be sealed and coated with release agent prior to molding.
• Subsequent casts of plaster, cement or wax require no release agent.

MSDS Brushable Mold Rubber

 Pourable

• Easy to use, low viscosity, one-to-one mix ideal for creating molds from prototypes, solid rubber positives or case molds for slip casting and jiggering.
• Captures minute detail.
• Rigid in thick sections.

MSDS Pourable Mold Rubber

10/23