• An air-floated Southern Ohio stoneware clay that can be used as a primary plastic clay in many cone^10 clay formulas.
• Chosen for its plasticity, this clay is mined in close proximity to coal deposits and, at times, contains escalated amounts of Sulphur.
• The average Sulphur content of this clay ranges near 0.25% in a typical analysis, and consideration should be given to the outgassing of this impurity when formulating clay bodies.
• This clay has an average iron oxide percentage of 1.23% and titania content of 1.96% that, can give tan to warm grey fired tones and are the reasons for its popularity.
• For large quantities (500 lbs. or more), please call for a quote 800.432.2529

printable Goldart MSDS.pdf

11/24